Certified GEV-EMICODE®
This product has extremely low VOC emissions: certified GEV-EMICODE® - EC1Plus
Просматриваемый продукт недоступен в вашей стране.
Certified GEV-EMICODE®
This product has extremely low VOC emissions: certified GEV-EMICODE® - EC1Plus
LEED credits
This product has extremely low VOC emissions and contributes towards LEED credits.
No dilution required: ready to use.
Application:
Shake before use. With the surface clean and dry, apply FILAPT10 evenly, using a large flat paintbrush, fleece applicator pad or roller, also working well into the grouting. As this is a water-based product, it stands up to residual humidity and can therefore even be applied just a few days after initial washing.Apply a second coat of the product 2-3 hours later following the same method. Wait at least 12 hours before walking on the surface.Maintenance:diluted solution of FILACLEANER.
For surfaces with low absorbency (slate, Botticino or Carrara marble) we recommend diluting the product with water (1:1 dilution). Do not use on polished surfaces. Do not apply the product externally if rain is forecast. The product cannot be applied to supports with problems connected with rising damp. If product has been wrongly applied or if a thorough cleaning is required, remove FILAPT10 using FILANOPAINT STAR.
Канистра на 5 литров: картонный ящик на 4 шт.
Бачок на 1 литр: картонный ящик на 12 шт.