Anti-fouling barrier
Anti-fouling barrier certified by tests conducted in conformity to the UNI EN ISO 846: 1999 method.
The product you are viewing is not available in your country
Anti-fouling barrier
Anti-fouling barrier certified by tests conducted in conformity to the UNI EN ISO 846: 1999 method.
LEED credits
This product has extremely low VOC emissions and contributes towards LEED credits.
No dilution required: ready to use.
Application:
Make sure that the surface is dry and clean, then apply the product by impregnating the material until it is saturated, using a brush or other application method.Dab any excess product with a clean cloth before it dries (roughly 10-15 minutes).The surface can be walked on after 4 hours.The water-repellent effect starts after 24 hours.FOR PROFESSIONAL USE ONLY:spray the product (airless system) on vertical surfaces until they are saturated and use appropriate PPE, as specified in the safety data sheet.
Carry out a patch test on a small surface area to check for any changes in colour. Avoid surface pooling. Do not apply the product outdoors if rain is forecast. Any stubborn product residues can also be removed when dry, by using FASEZERO diluted 1:10 and a white disc. Avoid applying on surfaces with condensation and under direct sunlight. Does not protect against acid aggression.
5-litre cans in boxes of 4
1 litre cans in boxes of 12