app-storearea-applicatoriarea-privatiarea-produttoriarea-progettistiarea-rivenditoriarrow-downarrow-rightbackbookcalculatorcartclosecontrolsdownloademailenvelopeeyefilterflaggoogle-playlinklogo-fila-footerlogo-filalogo-recommendedmarker-filamarkermateriali-esternomateriali-finituramateriali-internomateriali-lavaggiomateriali-manutenzionemateriali-pavimentomateriali-pretrattamentomateriali-protezionemateriali-rivestimentonewsletter-arrownewsletterpagenav-gridpagenav-nextpagenav-prevphone-filledphoneplayplusprintsearchshare-facebookshare-googleplusshare-linkedinshare-twittershareslider-arrow-leftslider-arrow-rightsocial-facebooksocial-flickr-bnsocial-flickrsocial-instagramsocial-linkedinsocial-pinterestsocial-twittersocial-youtubetoolbar-apptoolbar-capitolatotoolbar-certificationstoolbar-downloadtoolbar-eyedroppertoolbar-performance-warrantytoolbar-product-safetytoolbar-product-sheettoolbar-product-techtoolbar-retailertoolbar-supporttoolbar-videotutorialupload-file
filawet-prima-dopo-testata

FILAWET

FILAWET

SOLVENT-BASED WET-LOOK CONSOLIDATING PROTECTOR

anvendelsesområde

  • Gives wet look to untreated surfaces (tumble finishes, flame finishes, natural sawn finishes).
  • Protects material from water and oil.
  • Consolidating effect treatment.

fordele

  • Provides a wet effect that can be intensified with several applications.
  • Does not yellow with ageing or with any environmental condition.
  • Does not scrape from surface.

ideel til

  • Unpolished Natural Stone And Agglomerates
  • Tufo

Brug

No dilution required: ready to use.

Application:
1. On a clean and dry surface, apply one even and continuous coat of FILAWET with a brush.2. After 24 hours repeat treatment in the same way.3. For very absorbent materials, a third coat may be required to reach the desired wet effect.Maintenance:diluted solutions of FILACLEANER. In the areas most exposed to weather conditions we recommend applying the product again every two years.

Advarsel

do not apply the product externally if rain is forecast during the following 24 hours. Do not walk on floor while it's drying: wait 24 hours after last product application. In the areas most exposed to weather conditions we recommend applying the product again every two years. Do not apply on terracotta floors or polished/very smooth surfaces. If product has been wrongly applied or if a thorough cleaning is required, remove FILAWET using FILANOPAINT STAR. The product cannot be applied to supports with problems connected with rising damp.

rækkeevne

With one litre:
  • 10/20 m2

formater

1-litre cans in boxes of 12

før og efter

videovejledninger

Anmodning om oplysninger

(*) obligatoriske felter

To marketing activities
It is necessary to either give or deny your consent to marketing activities.
To profiling activities
You need to make a choice to continue
Ved at klikke på startknappen bekræfter jeg anmodning om tjenesten, som er angivet i punkterne a), b), c), d) i informationsbilaget, samt samtykke til at behandle mine data til tjenesten og med de behandlingsformer, som er anført i selvsamme informationsbilag, inklusiv eventuel behandling i EU-medlemslande eller i lande udenfor EU.