Certified Indoor Air Comfort Gold
Product with low VOC emissions which guarantees high indoor air quality
The product you are viewing is not available in your country
MP90 ECO XTREME
EXTREME ECO-COMPATIBLE WATER- AND OIL-REPELLENT PROTECTION
what's it for
- Water- and oil-repellent with natural finish.
- The best environmentally-friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt smoothed finishes.
- Reduces absorption without affecting the material’s natural look.
- It waterproofs, protects and facilitates cleaning.
- It is also ideal for grouting joints, ceramic and crackle effect surfaces, terrazzo, resin-marble, and stone slabs.
- Is also suitable for treating coloured cement tiles and manufactured stones.
- It provides an anti-graffiti protection that prevents graffiti paint from bonding to surfaces. It speeds the cleaning process because graffiti can be easily removed.
- Water- and oil-repellent: it hampers the absorption of common watery and oily stains.
advantages
- A product with an extremely low VOC and a low environmental impact; it also has the INDOOR AIR COMFORT GOLD certificate
- Free of hydrocarbon solvents: eco-friendly treatment
- Being a water-based product, it withstands residual humidity conditions and can therefore be applied 24–48 hours after the initial wash, thus speeding up the treatment
- Single-coat application: apply the product and rub it gently over the surface until it is completely absorbed
- Does not form surface film and does not yellow
- Ideal for protecting tables, as well as kitchen and bathroom tops
- The surface can be walked on after just 2 hours*
- *Application conditions:
- temperature = 20°C
- humidity < or = 60%
- Apply according to the indications shown on the label.
ideal for
- POLISHED PORCELAIN TILES
- MARBLE AND GRANITE
- NATURAL STONE AND AGGLOMERATES
- CONCRETE
certifications
Video tutorial
Method of use
No dilution required: ready to use.
Application: Shake before use.
For materials with matt finish (natural stone, terracotta, agglomerates, cement tiles):Apply MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well.Dab any excess product with a clean cloth before it dries. On highly absorbent materials, apply two coats of product with a 20-minute interval in between.For polished porcelain tiles, natural stone, agglomerates with glossy finish:Apply MP90 ECO XTREME on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad.Before the product dries (roughly 10-15 minutes), rub it using a microfibre cloth wetted with the product to favour its penetration. Dry the surface with a clean cloth. To speed up the process, it is possible to treat the surface with a single-disc machine.To complete the cycle with the finish:On porous materials such as natural stone, reconstructed tiles, agglomerates and cement tiles laid in indoor environments, a finishing wax can be applied depending on the material and on the desired effect after 4 hours (MATT, SATIN, CLASSIC, LONGLIFE).The surface can be walked on after just 2 hours.Water- and oil-repellent protection takes effect after 24 hours.Maintenance:use a diluted solution of CLEANER PRO.
Please note
Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product outdoors if rain is in forecast. Does not protect against acid aggression.
coverage
With one litre of product:
- polished porcelain tiles30-50 m²
- Polished Marble/Granite20-30 m²
- Matte polished stone10/20 m²
- “Coverage shown is indicative and refers to single coats”
formats
5-litre cans in boxes of 4
1-litre cans in boxes of 6
