What to do if...






what it's for

  • Enriches the color of polished, honed, textured and tumbled natural stone.
  • Highlights the natural surface character.
  • Protects the surface from dirt, water and oil stains.
  • Enhances and intensifies the stone’s natural color with a matte finish.
  • Excellent protection for countertops, inlays and backsplashes.
  • Hides cracks on granite surfaces.


  • Ideal for indoor and outdoor surfaces.
  • Does not form a film or yellow over time.
  • UV resistant.
  • Long lasting protection.
  • Treated surfaces are safe for food contact.
  • Provides very high coverage rates.

ideal for


before and after

How to use it

Ready to use, no dilution necessary. Apply STONEPLUS to a clean, dry surface using a paintbrush or other suitable applicator.

Wait up to 10 minutes, then rub the surface to allow the product to completely penetrate, until any excess residue is wiped off.
Do not allow excess to dry completely on the surface.Remove any residue by rubbing the surface with a cloth soaked in STONEPLUS.If residue is not removed, the surface will remain sticky.If rubbing the surface with a cloth soaked in STONEPLUS does not work, use mechanical action or a stripper.Denser materials will require maximum time to penetrate the surface.The surface may be used for normal foot traffic after 8 hours.Full cure and maximum sealer protection is achieved in 24 hours.For deeper, more intense color, apply 2-3 coats; wait at least 8 hours between coats.

Please note

Once the surface has been treated with STONEPLUS, the treatment cannot not be reversed; the stone cannot return to its original state. Before full application, test the product on a small, inconspicuous area or loose sample. On some materials installed outdoors, we recommend reapplying the product annually to maintain the optimal enhancing effect. The product does not protect against acid stains. Do not apply the product outdoors if rain is in the forecast. Apply and leave the product to dry in a well ventilated area. Keep the product in a cool, dry place.


1 QT (0.95 L)
  • Polished stone ›510 sq.ft. (47 m2)
  • Natural finish stone ›205-259 sq.ft. (19-24 m2)
  • Coverage rates are indicative and per coat.

Container Size

1 PT (473 ml) 12 plastic bottles per box

1 QT (946 ml) 6 plastic bottles per box

About us

Excellent product! It just took one spray to get rid of a patch of mould on the wall, without leaving a trace. The bathroom’s as good as new. Highly recommended!
Lucia Vitali
Easy to apply, excellent self-polishing power and good end results. I’ve still got to test how it lasts over time.
Sandro Giuliani
Come tutti i prodotti Fila ottimo. Toglie le alghe anche senza sciacquare o passare stracci.
Consigliato da un posatore amico non lo cambio con nessun altro prodotto anche se all'apparenza sembra costoso (ne basta veramente poco quindi dura tantissimo). Non lascia aloni e soprattutto non appiccica come gli altri detersivi per pavimenti. Lo uso da tanto tempo e lo consiglio. Anche gli altri prodotti Fila sono unici!
Fila products always live up to expectations. I used it on an unpolished Serizzo marble surface that had absorbed months and months of dirt.
Fila products are always very high quality.
You can always be sure with FILA products
FILA mantiene sempre le promesse

Choose your language