app-storearea-applicatoriarea-privatiarea-produttoriarea-progettistiarea-rivenditoriarrow-downarrow-rightbackbookcalculatorcartclosecontrolsdownloademailenvelopeeyefilterflaggoogle-playlinklogo-fila-footerlogo-filalogo-recommendedmarker-filamarkermateriali-esternomateriali-finituramateriali-internomateriali-lavaggiomateriali-manutenzionemateriali-pavimentomateriali-pretrattamentomateriali-protezionemateriali-rivestimentonewsletter-arrownewsletterpagenav-gridpagenav-nextpagenav-prevphone-filledphoneplayplusprintsearchshare-facebookshare-googleplusshare-linkedinshare-twittershareslider-arrow-leftslider-arrow-rightsocial-facebooksocial-flickr-bnsocial-flickrsocial-instagramsocial-linkedinsocial-pinterestsocial-twittersocial-youtubetoolbar-apptoolbar-capitolatotoolbar-certificationstoolbar-downloadtoolbar-eyedroppertoolbar-performance-warrantytoolbar-product-safetytoolbar-product-sheettoolbar-product-techtoolbar-retailertoolbar-supporttoolbar-videotutorialupload-file

FILAMP90 ECO PLUS

STAIN-PROOFING PROTECTOR WITHOUT HYDROCARBON SOLVENTS

what's it for

  • Natural finish stain-proofing sealant.
  • The best environmentally-friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt honed finishes.
  • Reduces absorption without affecting the material\'s natural look.
  • Impregnates, protects, and makes cleaning easier.
  • It is also ideal for grouting joints, ceramic and crackle effect surfaces, grit, resin-marble, and stone slabs.
  • Is also suitable for treating coloured cement tiles and reconstructed stones.
  • Scratch resistant: by protecting the surface, scratches can be removed easily during the cleaning process.

advantages

  • This product has extremely low VOC emissions: certified by GEV and marked EC1plus.
  • Contributes towards LEED credits.
  • Hydrocarbon solvent free: environmentally-friendly treatment.
  • Due to its water-base, it withstands residual humidity and can therefore be applied 24-48 hours after the initial wash, making treatment quicker.
  • Single-coat application: apply and rub in gently until completely absorbed.
  • Does not form surface film and does not yellow.
  • It is ideally suited for protecting kitchen and bathroom tops.
  • This product is tested and certified food-safe.
  • The surface can be walked on after just 4 hours.

ideal for

  • Polished Porcelain Tiles
  • Marble
  • Granite
  • Natural Stone And Agglomerates

certifications

  • Certified GEV-EMICODE®

    This product has extremely low VOC emissions: certified GEV-EMICODE® - EC1Plus

  • LEED credits

    This product has extremely low VOC emissions and contributes towards LEED credits.

  • Certified food-safe

    This product is tested and certified food-safe.

Method of use

No dilution required: ready to use.

Application:
For natural stone with a matte honed finish:on dry clean surfaces apply FILAMP90 ECO PLUS ‘to saturation’ using a brush or fleece pad, working completely into the material. Remove any excess product that has not been absorbed using a cloth or kitchen paper.For natural stone with polished finish:apply an even coat of FILAMP90 ECO PLUS on dry clean surfaces using a brush or fleece pad. Leave for 10 minutes, and then use a cloth or kitchen paper soaked in the product to make sure the application is uniform and remove any unabsorbed excess. Rub it gently in to ensure it penetrates and remove any excess.For polished porcelain tile and dense polished marble:remove the excess after 4 hours in the same way as for polished materials.apply an even coat of FILAMP90 ECO PLUS on dry clean surfaces using a brush or fleece pad. Leave for 10 minutes, and then use a cloth or kitchen paper soaked in the product to make sure the application is uniform and remove any unabsorbed excess. Rub it gently in to ensure it penetrates and remove any excess.

Please note

Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product externally if rain is forecast.

coverage

With one litre:
  • polished porcelain tiles30-40 m2
  • Polished Marble/Granite20-30 m2
  • Matte honed stone10-20 m2

formats

5-litre cans in boxes of 4

video tutorial

Request information

(*) obligatory fields

To marketing activities
It is necessary to either give or deny your consent to marketing activities.
To profiling activities
You need to make a choice to continue
By clicking on the send button, I confirm my request for the service indicated in points a), b), c), d) of the information, the consent for the processing of my data for the purposes of the service and using the methods envisaged in the information, including any processing in EU Member Countries or Non-EU Countries.