What to do if...


Instant cleaner for fresh concrete grouting



Instant cleaner for fresh concrete grouting

what's it for

  • Removes fresh cement grout residue, including grouts containing additives
  • Ideal for cleaning the backs of large format tile before laying
  • Perfect for cleaning grout floats and application tools
  • Prevents the dull smears or streaks caused by failure to remove grout residue


  • Contains biodegradable ingredients
  • RAPID DRY TECHNOLOGY: fast-acting, to be used during the laying process
  • Does not foam and does not require rinsing
  • Safe for the installer and the environment
  • Does not damage materials or grout
  • High coverage
  • Does not damage aluminium or steel trims
  • Does not emit harmful fumes
  • For indoor and outdoor use, on walls and floors
  • Patent pending: application system with effective and certified results

ideal for

  • Porcelain tiles
  • ceramic tiles
  • glass mosaic
  • quarry tiles

Video tutorial

Method of use

No dilution required: ready to use.

To remove cement grout residue during installation: wait for the grout to initially set and become firm to the touch (usually about 10 to 30 minutes, according to the grout manufacturer’s instructions). Carry out an initial cleaning of the surface with a sponge dampened with clean water.Then, complete the cleaning process following the steps below.Spray INSTANT REMOVER evenly on the damp surface.Let sit for 1-2 minutes, depending on the material finish.Clean using a sponge float, rinsing it often to keep it clean.For stubborn stains, repeat the above instructions after one hour.Refer to the grout manufacturer’s instructions for indications about when the surface is safe to use.Cleaning with INSTANT REMOVER can only take place during the installation process.To clean cement grout residue that has cured on the surface, use DETERDEK PRO acid cleaner for post construction cleaning.

Please note

Do not use on polished marble and acid sensitive materials. Test the product on a small, inconspicuous area of the surface to check the grout’s resistance to the product. If the flooring contains aluminium elements, the product can be applied according to the above instructions. Do not use abrasive sponges. Do not press too hard during cleaning to avoid damaging the grout.


indicative for 750 ml bottle
  • Large format tileup to 350 linear metres
  • MosaicUp to 15 m²
  • Coverage shown is indicative and per coat.


750 ml bottles with spray nozzle (trigger): 12-piece cartons

About us

Excellent product! It just took one spray to get rid of a patch of mould on the wall, without leaving a trace. The bathroom’s as good as new. Highly recommended!
Lucia Vitali
Easy to apply, excellent self-polishing power and good end results. I’ve still got to test how it lasts over time.
Sandro Giuliani
Excellent, like all Fila products. It removes algae even without rinsing or wiping with a cloth.
Recommended by a tiler who’s a friend of mine. I wouldn’t swap it for any other product, even if it seems expensive at first glance (you really need very little, so it lasts a very long time). It doesn’t leave smears and above all it isn’t sticky like other floor cleaners. I’ve used it for a long time and I recommend it. The other Fila products are unique as well!
Fila products always live up to expectations. I used it on an unpolished Serizzo marble surface that had absorbed months and months of dirt.
Fila products are always very high quality.
You can always be sure with FILA products

Choose your language