What to do if...

The product you are viewing is not available in your country






what's it for

  • Seals and protects porous materials such as untreated natural stone, terracotta and concrete from oily dirt.
  • Stain-proofing: it hampers the absorption of common watery and oily stains.
  • Suitable for interior and exterior surfaces.
  • For use on interior floors as a protective base-coat before the application of wax.
  • It provides an anti-graffiti protection that prevents graffiti paint from bonding to surfaces. It speeds the cleaning process because graffiti can be easily removed.


  • Natural finish: does not alter the surface’s original appearance.
  • A water-based product free of hydrocarbon solvents, which makes the treatment more eco-friendly and drastically reduces the treatment times as it can be applied to surfaces with residual moisture.
  • Does not form surface film
  • Does not alter terracotta frost resistance.
  • Excellent also for concrete surfaces.
  • Treated surfaces are safe for food contact
  • A VOC-free product with a low environmental impact and INDOOR AIR COMFORT GOLD certificate

ideal for



  • Certified Indoor Air Comfort Gold

    Product with low VOC emissions which guarantees high indoor air quality

before and after

Method of use

No dilution required: ready to use.

Indoor surfaces consisting of terracotta and natural stone and concrete:
On a clean and dry surfaces, apply one coat of W68 evenly, using a brush or fleece pad, while soaking the joints well.Wait 4 hours and then apply a coat of the specific finishing wax for the desired aesthetic effect (MATT for a natural effect, LONGLIFE for a polished finish, if available for sale).With absorbent materials, apply a further coat of reinforcement wax one hour after the first coat of wax. For maintenance with satin effect, apply one coat of SATIN.Outdoor surfaces consisting of terracotta, natural stone and concrete:On a clean surface, apply 2 coats of W68 evenly, using a brush or fleece pad, also soaking the joints well.Remove any excess unabsorbed product by dabbing it with a micro-fibre cloth, before the product dries.Maintenance:diluted solution of CLEANER PRO.

Please note

Carry out a patch test on a small surface area to check for any changes in colour. Do not apply the product outdoors if rain is in forecast. Does not protect against acid aggression.


With one litre of product:
  • Terracotta (rustic Tuscan, polished)15-20 m²
  • Concrete, Terracotta (handmade, Spanish, hollow tile, brick)7-10 m²
  • Stone10/20 m²
  • “Coverage shown is indicative and refers to single coats”


5-litre cans in boxes of 4

1 litre cans in boxes of 12

About us

Excellent product! It just took one spray to get rid of a patch of mould on the wall, without leaving a trace. The bathroom’s as good as new. Highly recommended!
Lucia Vitali
Easy to apply, excellent self-polishing power and good end results. I’ve still got to test how it lasts over time.
Sandro Giuliani
Excellent, like all Fila products. It removes algae even without rinsing or wiping with a cloth.
Recommended by a tiler who’s a friend of mine. I wouldn’t swap it for any other product, even if it seems expensive at first glance (you really need very little, so it lasts a very long time). It doesn’t leave smears and above all it isn’t sticky like other floor cleaners. I’ve used it for a long time and I recommend it. The other Fila products are unique as well!
Fila products always live up to expectations. I used it on an unpolished Serizzo marble surface that had absorbed months and months of dirt.
Fila products are always very high quality.
You can always be sure with FILA products

Choose your language