FILAMATT

For the protection of floors and bare walls: Dilute FILAMATT slightly to make it more fluid and easier to apply by adding a glass of water per litre of product. On a clean and dry surface, apply one even coat of FILAMATT using a fleece pad or cloth (brush).

Wait until completely dry (about an hour) and then apply a second coat in the opposite direction to the first (i.e. horizontal if previously applied vertically or vice-versa). The floor can be walked on after one hour. For a greater sheen, buff with a floor polisher or a wool cloth. If treating terracotta and highly absorbent natural stone (limestone, sandstone, old quarries, rough quartzite), we recommend a base coat of a water-proofing product such as FILAFOB or FILAW68.
For maintenance:Restoring finish (every 2-3 months): after cleaning the surface with a diluted solution of FILACLEANER (1:200), apply FILAMATT diluting 500 ml of product in 5 litres of water. The floor can be walked on once it is dry. Restoring protection (once a year): apply slightly diluted wax (200 ml of water per litre of product) using a fleece pad, cloth or other applicator. The floor can be walked on once it is dry.For Anti-flaking treatment: apply an even coat of undiluted FILAMATT to the dry floor using a paintbrush. The treated surface will be dry after approximately one hour.