Warning: array_merge_recursive(): Argument #1 is not an array in /home/www/www.filasolutions.com/www/site-functions.php on line 1403
Water-based water-repellent protector HYDROREP ECO | FILA Solutions
What to do if...



what's it for

  • Water repellent with natural effect.
  • Deeply penetrates the material while allowing the surface to breathe.
  • Hampers the build-up of algae, moulds and lichen.
  • Protects the surface against deterioration caused by weathering.


  • Anti-fouling barrier certified by tests conducted in conformity to the UNI EN ISO 846: 1999 method.
  • Ideal for protecting external walls.
  • Resists UV radiation.
  • Does not alter terracotta frost resistance.
  • It protects against efflorescence.
  • Can be applied to surfaces with residual humidity: drastically reduced application times.
  • The treatment preserves the material's level of breathability above 90%.

ideal for

  • Unpolished Stone And Agglomerates
  • Concrete
  • Terracotta
  • Exposed Bricks
  • Quarry Tiles
  • Plaster
  • Tufo


  • Anti-fouling barrier

    Anti-fouling barrier certified by tests conducted in conformity to the UNI EN ISO 846: 1999 method.

before and after

Method of use

No dilution required: ready to use.

Apply the product on a clean and dry surface by wetting the material with a paintbrush until it is saturated.Use a clean cloth to pad dry and remove any residues before the product dries completely.The surface dries after a mere 4 hours.FOR PROFESSIONAL USE ONLY:spray the product (airless system) on vertical surfaces until they are saturated and use appropriate PPE, as indicated in the safety information sheet.

Please note

Carry out a patch test on a small surface area to check for any changes in colour. Avoid accumulations of unabsorbed product. If it starts raining during the treatment, interrupt application and cover the entire surface. Do not apply the product externally if rain is forecast.Any stubborn residues can be removed when the product dries, using FILAPS87 diluted 1:10 with a white disc. Avoid applying on surfaces with condensate build-up and under direct sunlight. The product takes effect 24 hours after application and maximum protection is reached after 10 days.


With one litre:
  • Terracotta, exposed brick walls, quarry tiles, stone, plaster10/20 m2
  • Concrete8-10 m2


5-litre cans in boxes of 4

1 litre cans in boxes of 12

Request information

(*) obligatory fields

To marketing activities
It is necessary to either give or deny your consent to marketing activities.
To profiling activities
You need to make a choice to continue
By clicking on the send button, I confirm my request for the service indicated in points a), b), c), d) of the information, the consent for the processing of my data for the purposes of the service and using the methods envisaged in the information, including any processing in EU Member Countries or Non-EU Countries.